Nidek Medical LEX-DRILL, Руководство по обслуживанию

Страница: 14 / 94

LHM2A*RDA001A/E
3 - 4
(Lex 1000 Control panel)
A
T
S
R T
T O P
S
6. Lens button
8. Mode button
9. Polish button 7. Frame button
10. FC button
1
2 3 4
5
11. R/L button
12
1. button
Switches the screen between the layout and
menu.
2. button, button
Moves the highlight on the screen.
3. button, button
Enters the data such as prescription.
4. button
Changes the layout entry method.
5. button
Calls up the data measured by the tracing
unit on the display.
6. Lens button
Used to select the lens material among
CR39 (plastic), Hi-index (high index plastic),
Polyca. (polycarbonate), Acrylic (acrylic
resin), Trivex, Urethane (polyurethane), and
Glass. (Glass cannot be selected in type
PLB-8.)
In addition, extended pressing of this button
switches soft processing on and off.
7. Frame button
Used to select processing mode.
Extended pressing of this button switches
8-base curve processing on and off.
8. Mode button
Used to select processing mode.
Extended pressing of this button switches
nano cup processing on and off.
9. Polish button
Switches polishing on and off.
10. FC button
Switches frame changing mode on and off.
11. R/L button
Used to select the side of a lens to be
processed, right (R) or left (L).
12. button
Starts processing.