Nicotra Gebhardt DDMP 10/10, Руководство по эксплуатации

Страница: 8 / 60

Rev. 0 - 05/11/2020
OPERATING MANUAL OPERATING MANUAL
EN EN
8/60
ALL RIGHTS ARE RESERVED ACCORDING TO THE
INTERNATIONAL COPYRIGHT CONVENTIONS
,
The reproduction of any part of this manual, in any form, is forbidden without the prior written
authorization of the manufacturer.
The content of this guide can be modified without prior notice. Great care has been taken in collecting and
checking the documentation contained in this manual to make it as complete and comprehensible as possible.
Nothing contained in this manual can be considered as a warranty, either expressed or implied - including, not in a
restrictive way, the suitability warranty for any special purpose.
Nothing contained in this manual can be interpreted as a modification or confirmation of the terms
of any purchase contract.
The Nicotra Gebhardt products have not been conceived to work in areas at risk of explosions. In case of damage or mal -
function, the DDMP fans must not be used until the Customer Care Technical Service has repaired it.
The installer and the maintenance man must know the content of this manual. Although the main features of the equipment described
in this manual are not subject to change, the manufacturer reserves the right to modify the components, details and accessories
it deems necessary to improve the product or to meet manufacturing or commercial requirements at any time and without being
obliged to update this manual immediately.
1.6 Informative letter
WARNING WARNING
The original configuration of the fan must not be changed at all, except as prescribed in this manual.
On receiving the fan, make sure the supply corresponds to what has been ordered.
In case of non-compliance immediately inform the manufacturer.
Also make sure the DDMP fan has not been damaged during transport.
For information concerning the nearest supporting center, please get in touch with your retailer.
WARNING WARNING
1.7 Safe operating area
The drivers are protected against overload conditions and a safe operating area is defined by a limit of speed, output power and
motor current.
For more details refer to the ANNEX "Analog Signal Considerations".
Customer Care Technical Service