Nicotra Gebhardt DDMP 10/10, Руководство по эксплуатации

Страница: 10 / 60

Rev. 0 - 05/11/2020
OPERATING MANUAL OPERATING MANUAL
EN EN
10/60
3. DATA PLATE
The manufacturer’s identification plate is located on the fan.
Several safety warnings are applied to the fan; such warnings must be strictly followed by everyone dealing with this product.
The company is not to be held responsible for damage to property or accidents to people which might occur if the above-men-
tioned warnings are not observed. In such a case, the operator is the only person responsible.
The identification plate is located on the fan scroll case.
REF. DESCRIPTION
1 MODEL DESIGNATION
2 REGAL BELOIT ITALY CODE
3 MODIFICATION LEVEL
4 PRODUCTION LOT NO.
5 NO. PHASES & CURRENT TYPE
6 ELECTRICAL FREQUENCY
7 VOLTAGE
8 IP PROTECTION GRADE
9 MOTOR INSULATION CLASS
10 CAPACITOR VALUE (WHEN PRESENT)
11 MAXIMUM CURRENT INPUT
12 MOTOR RATED POWER
13 RATED RPM
To improve the Electromagnetic compatibility a ferrite should be put on the power supply cable (close to the driver). The
compliancy to the standards is intended for a single fan. No tests have been made on multiple installations.
The EMC tests are conducted without 485 communication wire, analog signals or Bluetooth devices.
WARNING WARNING
REF. DESCRIPTION
14 THERMAL PROTECTOR (Y/N)
15 OPERATING TEMPERATURE RANGE
16 UNIT EXCEEDS 30KG (Y/N)
17 UNIT EXCEEDS 85 dB (A) SOUND POWER (Y/N)
18 OPERATING MANUAL
19 OVERALL EFFICIENCY (η)
20 EFFICIENCY CATEGORY (STATIC OR TOTAL)
21
MEASUREMENT CATEGORY USED TO DETER-
MINE THE ENERGY EFFICIENCY (A-D)
22
EFFICIENCY GRADE AT OPTIMUM ENERGY EFFI-
CIENCY POINT
23 ErP COMPLIANCE
24 CUSTOMER CODE (WHEN APPLICABLE)
25 PRODUCTION DATE
The compliancy to the standards are intended for a single fan.
No tests have been made on multiple installations.