Rev. 0 - 05/11/2020
OPERATING MANUAL
OPERATING MANUAL
EN
EN
18/52
Ensure correct grounding connections. The ground cable must be enough to carry the maximum supply fault current which nor
-
mally will be limited by the fuses or MCB. Suitably rated fuses or MCB should be fitted in the main supply to the driver, according
to any local legislation or codes.
WARNING
WARNING
The driver operates at high voltages.
Certain parameter settings may cause the driver to restart automatically after an input power failure.
CAUTION
CAUTION
9.3 Ambient operating conditions
The installation place must be in accordance with the IP protection degree of the fan. In this respect, refer to the ID plate de
-
scribed in chapter 3.
Humidity Range: 90% non-condensing
Altitude: if the fan is to be installed at an altitude > 1000m, derating is required.
Shocks: do not drop the fan or expose it to sudden shock.
Vibration: do not install the fan in an area where it is likely to be exposed to constant vibrations.
CAUTION
CAUTION
9.4 Fan installation
Place the fan according to your needs, after having checked its dimensions and the position of the fixing holes.
9.5 Accessory installation
As previously mentioned, all the required options are generally installed by the Manufacturer before delivery.
The following describes the composition, the main features and the mounting procedure of each accessory that is ordered separately.
9.5.1 Outlet flanges
Assembly
The flange shall be assembled with the four edges external to the side plate.
Materials
Galvanized steel accordirng to EN 10346 standard.
Size
Code
A
B
C
F
G
280
RE60005ZZ0000000
361
417 195,5 471,7 544,1
315
RE60006ZZ0000000
404
460
217 524,2
605
355
RE60007ZZ0000000
453
509 241,5 584,7
677,8
mm
mm
mm
mm
