NC-AD300E Manual
- 35 -
Priority, specify the priority of routing rules, will be related to the priority of analog circuit
parameters in the SLC->Line Part table.
SID, the Prefix of the calling number. The conditions to make judgement.
Sequence, the action will be followed from the sequence small to large, so when the small sequence
failed, route can goes to larger number sequence, thus can back up for multi routes.
Action, specify how to handle the call. There are several options below:
1. Switch to digital trunk
To forward calls to E1 trunking. The PCM time slot will be used for the call is decided by
the selection in description. There are three options to choose from.
1)Specify PCM, as shown below:
PCM ID is the E1 that you want to select.
