NC-AD300E Manual
- 16 -
processor number:0
number of processors
host name:server
host name
file name:pbxe.st
netloaded at startup from the network file names
inet on ethernet(e):192.168.16.254:FFFFFF00
device itself ipaddress:Subnet Mask
host inet (h):192.168.16.85
FTP host IP address of service
gateway inet (g):192.168.16.1
Ethernet Gateway IP adress
user (u) :ad300e
connect FTP service user name
ftp password (pw):nice
connect FTP service password
flags (f):0x0
boot parameters
DeviceID :0x0
device ID
4.3.2 modify the boot parameters
If in boot state,
"[Boot]:"
type
"c"
If in running state,
"->"
type
“cboot”
Instructions:
Type the new value directly behind the old value, enter the changes, and then move to the
next one.
Enter ".", Then delete the current content.
Enter "-" then return to the previous row to make changes.
Enter "Ctrl + D", exit change.
Directly press enter, will move to the next one.
boot device: at0
can not be changed
processor number: 0
can not be modified
host name: server
can be freely modified
file name: pbxe.st
according to the actual file name changes
inet on ethernet (e): 192.168.16.254: FFFFFF00
Modification form must be filled, if not the subnet mask, default taken 255.255.255.0
host inet (h): 192.168.16.85
Upgrade by FTP software to use, usually do not need to modify
gateway inet (g): 192.168.16.1
Intenet using to access the gateway address, depending on the network situation.
user (u): ad300e
according to practical situation
ftp password (pw): nice
according to practical situation
flags (f): 0x0
Parameter values can be bitwise combination.
0x04 – go to the boot startup state, rather than running state.
0x08 - Quick Start to run state can not enter to boot state.
0x20 - Disable Telnet login account authentication.
0x40 - use DHCP to automatically obtain parameters.
