49
10. FAQ
Please install the right brush into the right bottom mounting port of the machine, the left
brush into the left bottom mounting port of the machine and ensure that the two side
brushes are in place.
Q :
What if the strength of vacuuming is weak?
A:
First of all, check whether the dust bin is full, and the robot is full charged. If it is, you can
try to switch it to the higher mode. For litter which is difficult to collect, try to clean it on
Spot Cleaning Mode.
Q:
What if my charger has difficulties charging the robot?
A:
Please make sure you turn on the charging stand before charging and check if the
electrical cord is connected to the charging stand (Put it back manually or press the
Power button when the robot is 1 meter in front of the charging stand.)
Q:
What if the robot cannot find the charging stand?
A:
The charging stand should be placed against the wall with at least 1 meter clearance
each side and 2 meters in front. Sometimes you can just put it back manually.
Q:
What should I do if the remote control is out of order?
A: 1.
The remote control has an effective control distance of 5 meters. Please make sure
that the remote point to the master.
2.
Replace the battery with a new one if the battery has run out capacity.
3.
Please make sure the master power switch is turned on and has sufficient power to
complete the operation.
4.
Please wipe the infrared emitter of the remote control and the infrared receiver of the
master with clean towel.
Q:
Why does the master return to charging after cleaning?
A:
The working time of the master varies depending on the complexity of the room, the
amount of garbage and the cleaning mode.
