42
4. Operation Instructions
4.4. Water tank
This product is equipped with a water tank assembly. After the cleaning work is completed, if
there is a demand for mopping, the dust box can be replaced with a water tank assembly. For
the cleaning method, please refer to the [Maintenance] section in this manual.
Do not use the water tank assembly on the carpet. When cleaning with the rag function, fold
the edge of the carpet to avoid foreign matter on the rag from soiling the carpet.
In the cleaning, please pay attention, add water, or dean up in time, remove the water storage
box when adding water.
When charging, be sure to remove the water permeable wiper assembly.
1. Add Water
Open the water inlet cover
and take enough water.
4.3. Roller brush
Remove the roller brush cover
plate, remove the roller brush,
cut off the hair wound on it and
then use the cleaning brush to
clean it.
2. Sticking the water rag
Close the water inlet cover
and stick the water rag.
3. Install water tank
assembly
Press the dust box release
button at the rear of the
master to remove the dust box
and replace the water tank
assembly.
4. Mop
Start any cleaning mode as needed, and the master
will perform cleaning and mopping.
