Nice TITAN12L, Руководство пользователя

Страница: 21 / 36

www.hysecurity.com
21
10.6 - 936 Control Board Wiring
TITAN limit switch and smart sensor wiring
Connect the Nice TITAN actuator cable to the 5-pin
connector as shown below. These connections enable the
Nice TITAN limit switch and smart sensor inputs into the
gate controller.
TITAN actuator motor wiring
Connect the Nice TITAN actuator motor leads to the 2-pin
connector as shown below.
Note: If the gate moves in the opposite direction from
what is expected, reverse the actuator wiring from what is
shown. (Red to Pin 2, Black to Pin 1).
Install the 5 and 2-pin connector into the connection labeled
“Motor 1” on the controller. Install the 5 and 2-pin and
connector into the connection labeled “Motor 2” for a dual
leaf swing gate installation. For dual actuators, the actuator
with the shorter cable must plug into Motor 1 connections.
TITAN limit switch and smart sensor wiring
Connect the Nice TITAN actuator cable to the 5-pin
connector as shown below. These connections enable the
Nice TITAN limit switch and smart sensor inputs into the
gate controller.
TITAN actuator motor wiring
Connect the Nice TITAN actuator motor leads to the 2-pin
connector as shown below.
Note: If the gate moves in the opposite direction from
what is expected, reverse the actuator wiring from what is
shown. (Red to Pin 1, Black to Pin 2).
Install the 5 and 2-pin connector into the connection labeled
“Motor 1” on the controller. Install the 5 and 2-pin and
connector into the connection labeled “Motor 2” for a dual
leaf swing gate installation. For dual actuators, the actuator
with the shorter cable must plug into Motor 1 connections.
10.6.2 - TITAN ACTUATOR WIRING (PUSH TO OPEN) 10.6.1 - TITAN ACTUATOR WIRING (PULL TO OPEN)
10 - INSTALLATION PROCEDURES (CONT.)
GREEN
ORANGE
BLUE
YELLOW
WHITE
BLACK
RED
TITAN ACTUATOR
(with encoder)
TITAN ACTUATOR
MOTOR LEADS
TITAN ACTUATOR SINGLE MOTOR - PULL TO OPEN
WHITE: Close Limit
ORANGE: Open Limit
GREEN: Limit Common
YELLOW: Encoder Signal
BLUE: Encoder Ground
NOTE: If the gate moves in
opposite direction
from what is
expected, reverse
the motor power
lead wiring
GREEN
WHITE
BLUE
YELLOW
ORANGE
RED
BLACK
TITAN ACTUATOR
(with encoder)
TITAN ACTUATOR
MOTOR LEADS
TITAN ACTUATOR SINGLE MOTOR - PUSH TO OPEN
WHITE: Close Limit
ORANGE: Open Limit
GREEN: Limit Common
YELLOW: Encoder Signal
BLUE: Encoder Ground
NOTE: If the gate moves in
opposite direction
from what is
expected, reverse
the motor power
lead wiring
GREEN
ORANGE
BLUE
YELLOW
WHITE
BLACK
RED
TITAN ACTUATOR
(with encoder)
TITAN ACTUATOR
MOTOR LEADS
ORANGE
GREEN
BLUE
WHITE
YELLOW
RED
BLACK
TITAN ACTUATOR
(with encoder)
TITAN ACTUATOR
MOTOR LEADS
TITAN ACTUATOR DUAL MOTOR - PULL TO OPEN
WHITE: Close Limit
ORANGE: Open Limit
GREEN: Limit Common
YELLOW: Encoder Signal
BLUE: Encoder Ground
NOTE: If the gate moves in
opposite direction
from what is
expected, reverse
the motor power
lead wiring
GREEN
WHITE
BLUE
YELLOW
ORANGE
RED
BLACK
TITAN ACTUATOR
(with encoder)
TITAN ACTUATOR
MOTOR LEADS
WHITE
GREEN
BLUE
ORANGE
YELLOW
BLACK
RED
TITAN ACTUATOR
(with encoder)
TITAN ACTUATOR
MOTOR LEADS
TITAN ACTUATOR DUAL MOTOR - PUSH TO OPEN
WHITE: Close Limit
ORANGE: Open Limit
GREEN: Limit Common
YELLOW: Encoder Signal
BLUE: Encoder Ground
NOTE: If the gate moves in
opposite direction
from what is
expected, reverse
the motor power
lead wiring