Nice TITAN12L, Руководство пользователя

Страница: 20 / 36

20
www.hysecurity.com
10.5 - TITAN12L Actuator Wiring
Using the supplied key, unlock the manual release handle. Lift upwards on the release handle as shown.
FIGURE 10 - 8 MANUAL RELEASE HANDLE
With the release handle up, remove the screws from the limit cover and remove the cover. On the bottom of the actuator
loosen the strain relief nut and insert the wire into the actuator housing. The connections are on the top of the actuator
behind the limit assembly.
Terminal block
for harness
connections
Connect the wiring to the actuator
terminal block as shown.
THE FOLLOWING SECTION NEED ONLY BE USED FOR REWIRNG IN THE EVENT OF A DESIRED
LONGER OR SHORTER CABLE LENGTH.
FIGURE 10 - 9 WIRE HARNESS INSERTION
FIGURE 10 - 10 TITAN12L/12L1 ACTUATOR WIRING
10 - INSTALLATION PROCEDURES (CONT.)