Nice ROBO600, Инструкции и предупреждения по установке

Страница: 17 / 32

English –
15
7
PROGRAMMING
In this manual the programming procedures are explained with the use of icons and their meanings are given in the following glossary:
GLOSSARY
Symbol Description Symbol Description
led on wait ...
led off observe / check
led flashing press and release the key
OFF
shut off mains power hold down the key
ON
turn on mains power release the key
press and release the desired key on the radio
transmitter to be memorized
↕
release the key exactly when the led behaves in the
specified manner (on, flashing, off)
hold down the desired key on the radio transmitter
to be memorized
correct procedure
release the transmitter key INCORRECT procedure
The control unit has a variety of factory settings which can be reprogrammed: this chapter describes the available functions and how to program
them. Check also chapter 8 “Detailed information”.
The control unit is equipped with microswitches, trimmers and the keys described below.
Name Symbol Description
PROGRAM SWITCH Activates a function
Trimmer
TL
Sets the ‘Operating Time’ parameters (see paragraph 7.1.1)
Trimmer TP Sets the ‘Pause Time’ parameters (see paragraph 7.1.1)
Trimmer F Sets the ‘Force’ parameters (see paragraph 7.1.1)
RADIO key
Programs the radio receiver
PROGRAM key Use for device programming