Nice MC424/V1, Инструкции и предупреждения по установке и использованию

Страница: 13 / 13

12 – English
Remote memorising
It is possible to enter a new transmitter in the receiver memory without using
the keypad. A previously memorised and operational remote control must be
@U@HK@AKD3GDMDVSQ@MRLHSSDQVHKKfHMGDQHStSGDBG@Q@BSDQHRSHBRNESGDOQDUHNTRKX
LDLNQHRDCNMD3GDQDENQDHESGDjQRSSQ@MRLHSSDQHRLDLNQHRDCHMLNCD(SGD
new one will also be memorised in mode I and any of the buttons of the trans-
LHSSDQB@MADOQDRRDC(ESGDjQRSSQ@MRLHSSDQHRLDLNQHRDCHMLNCD((SGDMDV
one will also be memorised in mode II but the button activating the required
NTSOTSLTRSADOQDRRDCNMSGDjQRSSQ@MRLHSSDQ@RLTRSSGDATSSNMQDPTHQDCSN
ADLDLNQHRDCNMSGDRDBNMC8NTMDDCSNQD@C@KKSGDHMRSQTBSHNMRHM@CU@MBD
so you can perform the operations in sequence without interruptions. Now,
VHSGSGDSVNQDLNSDBNMSQNKRSGD-$6NMDQDPTHQHMFBNCDLDLNQHR@SHNM@MC
SGD.+#NMDSG@SHR@KQD@CXLDLNQHRDCONRHSHNMXNTQRDKEVHSGHMSGDNODQ@SHMF
Q@MFDNESGDQ@CHNBNMSQNKRVHSGHML@WHLTLQ@MFD@MCB@QQXNTSSGDHMRSQTB
-
tions listed in the table.
All the memorised codes can be deleted as follows:
DELETING ALL TRANSMITTERS
4
TECHNICAL CHARACTERISTICS OF THE PRODUCT
5HFHLYHUV 60;, 60;,6
Decoding 1NKKHMFB.1 Rolling code AHS2,(+.
Transmitter compatibility %+.15$1851-("$6 8$1&./+ -.-("$.-$ 2,(+.
)UHTXHQF\ 433.92 MHz 433.92 MHz
Input impedance *Ƅ *Ƅ
Outputs 4 (on SM connector on SM connector
6HQVLWLYLW\ better than §5 better than §5
Working temp. EQNL¦"SN¦" EQNL¦"SN¦"
Transmitters: FLO2R SMILO
Buttons or 4 according to the versions 2 or 4
Power input 5 !@SS 5 Batt. 23 A
Absorption L L
7UDQVPLVVLRQIUHTXHQF\ 433.92 MHz 433.92 MHz
Working temp. EQNL¦"SN¦" EQNL¦"SN¦"
Radiated power DRSHL@SDC@OOQNWHL@SDKXL6$1/ DRSHL@SDC@OOQNWHL@SDKXL6$1/
Range DRSHL@SDCLNTSCNNQRLHMCNNQR DRSHL@SDCLNTSCNNQRLHMCNNQR
'LPHQVLRQV:HLJKW WWLLF ŠLLW'LLF
Encoding CHFHS@KW BNLAHM@SHNMR CHFHS@KW BNLAHM@SHNMR
WARNINGS: q KKSDBGMHB@KBG@Q@BSDQHRSHBRRS@SDCQDEDQSN@M@LAHDMSSDLODQ@STQDNE¦"Ÿ¦"q-HBD2O@QDRDQUDRSGDQHFGSSNLNCHEXSGDOQNCTBS@S@MX
SHLDDVGHKDL@HMS@HMHMFSGDR@LDETMBSHNM@KHSHDR@MCHMSDMCDCTRDq3GDQ@MFDNESGDSQ@MRLHSSDQR@MCSGDQDBDOSHNMB@O@BHSXNESGDQDBDHUDQRL@XADRTAIDBSSN
interference that may alter their performance. In the event of interference, Nice cannot guarantee the effective capacity of their devices.
TABLE B3 - Remote Memorising
01. /QDRRSGDATSSNMNMSGD-$6SQ@MRLHSSDQENQ@SKD@RSRDBNMCR@MCSGDMQDKD@RD
02. /QDRRSGDATSSN#SQ@MRLHSSDQSHLDRRKNVKX
03. /QDRRSGDATSSNMNMSGD-$6SQ@MRLHSSDQRKNVKX@MCSGDMQDKD@RD
Note – If there are other transmitters to memorise, repeat the above steps for each new transmitter.
R
W
TX
TX TX
TX
TX
TX
R R
WR
TABLE B4 - Deleting all transmitters
01. Press the receiver button and hold it down
02. 6@HDCSNKHFGSTOSGDMV@HSENQHSSNRVHSBGNEE@MCSGDMV@HSENQHSSNk@RGSHLDR
03. 1DKD@RDSGDATSSNMDW@BSKXCTQHMFSGDSGHQCk@RG
Note tLIWKHSURFHGXUHZDVSHUIRUPHGFRUUHFWO\WKH/HGZLOOƅDVKWLPHVDIWHUDIHZPRPHQWV
RX
RX
x3
3°
W
EN