Nic Mercury/RH-PE, Инструкция по эксплуатации

Страница: 9 / 23

3. Specifications
RH-PE
–
Mercury collection-tube reheating furnace for the PE-1 7
No.600-2113-03
3. Specifications
3.1. Equipment specifications
Carrier gas :Purified dry air (supplied from the PE-1)
Samples :160L mercury collection tube
Dimensions and weight :150 W x 177 D x 350 H mm, 6 kg
Power voltage :Single phase 100 to 260 VAC, 50/60 Hz (3-pin socket)
Power capacity :0.3 kVA
Power quality :No surges, harmonics, noise, etc.
4. Installing the equipment
4.1. Installation conditions
4.1.1. Installation environment
Room temperature :15°C to 35°C
Vibration :Avoid any vibrations that the human body can strongly
sense.
Dust and dirt :Maintain a clean atmosphere without any smoke, dust, or
other factors that can adversely affect measurements.
Please also refrain from smoking anywhere near.
Installation space :A minimum area of 1,000 mm wide x 800 mm deep is
necessary. Ensure a firm foundation (without any wobble)
capable of bearing approximately 60 kg.
Others :Avoid direct exposure to sunlight and air from air
conditioners, fans, etc.
Special notes :Never place the equipment anywhere volatile
halogen-based reagents such as organochlorine solvents
are used. In addition, avoid anywhere such gases may be
present.
4.2. Installation/connection
(1) Place the RH-PE to the left of the PE-1.
(2) Connect the supplied signal cable between the PE-1 and RH-PE.
(3) Connect the power cable to the RH-PE.
(4) Connect the supplied Teflon tubes (one yellow tube and one transparent tube) between the
PE-1 and RH-PE.
Yellow Teflon tube
transparent Teflon tube