Nic Mercury/RH-PE, Инструкция по эксплуатации

Страница: 8 / 23

2. Principles
6 Mercury/RH-PE
‒
Mercury collection-tube reheating furnace for the PE-1
No.600-2113-03
Table 1: Description of each part of the RH-PE
No. Name Function Remarks
1
Joint with a
septum A septum for injecting the
standard gas is built in. Carrier gas is supplied from
the PE-1.
2
Mercury collection
tube Mercury collection tube whose
content is to be measured
3 Heater
Heater for heating the mercury
collection tube
4 Rubber coupling
5 Gas washing bottle
Removes moisture, tar, acid
gas, etc. Approximately 2 cm of
(1+1)buffer solution of pH 7
6 Roller clamp
7
Dehumidifying
bottle
Removes moisture
8 Electronic cooler
Cools the gas washing bottle
and dehumidifying bottle Cools down with an electronic
cooling device
9 Elbow joint
10 AC INLET
Power connector with a power
switch
A 5A fuse is built in.
11
PE-1 connection
terminal
Terminal for PE-1 connection
This terminal connects to the
PE-1 with a special cable.