Nic Mercury/RH-PE, Инструкция по эксплуатации

Страница: 12 / 23

5. Measurement
10 Mercury/RH-PE
‒
Mercury collection-tube reheating furnace for the PE-1
No.600-2113-03
5.4. Measurement
5.4.1. Setting measurement mode
Select [Run]-[Mode] from the menu, or click the icon to set the measurement mode.
Measurement mode
Set the heating speed of the mercury collection section for measurement in accordance
with the weight of the mercury.
A guideline for that is as follows:
LOW:
0 to 10 ng (Low concentration)
The heater H5 of the mercury collection section heats up at full power, and the
mercury gas is quickly discharged into the fluorescence cell.
HIGH:
0 to 100 ng
The heater H5 of the mercury collection section slowly heats up, and the mercury gas
is gradually discharged into the fluorescence cell.