Nibe DVC 10-50, Руководство пользователя

Страница: 20 / 36

www.nibe.com
20
DVC 10-50 (W)
If the Wi-Fi router capacity is not enough to connect a required number
of the units, you may use an extra wireless access point to connect the
other units. Optionally connection of several Master units to the network
for arranging a zone control is also possible.
Router with its
wireless access
point
Master Slave №1
...
Slave № n Mobile device
Extra wireless
access point
Slave № n
... ...
Slave №32 Mobile device Mobile device
CONFIGURING THE UNIT IN MASTER MODE ACCORDING TO THE DIAGRAM NO. 1:
•
Start the software at your PC to set up the unit.
• Connect the unit and PC using a USB to mini USB cable.
•
Select a required device from the dropdown list (1).
•
Select Master for required device mode (2).
•
Select No Wi-Fi router for the connection type (3).
•
Open the tab Wi-Fi (4).
•
Select the type of security for the Master point (5). It is an optional requirement.
•
Open means no password protection.
•
WPA_PSK means a password protected encryption.
•
WPA2_PSK means a password protection encryption.
• WPA_WPA2_PSK means a password protection encryption.
Enter a password for the Master wireless access point (6). The default Wi-Fi password is 11111111.
Select a channel for the Master wireless access point (7). It is an optional requirement.
Apply and save the selected parameters (8).
S/N: a unique serial number of the device. It is displayed in the name of the Master wireless access point and is stated on the unit control board.
1
4
5
6
7
2 3