Nibe DVC 10-50, Руководство пользователя

Страница: 19 / 36

www.nibe.com
19
Configuration menu
Press the Menu button ( ) to open the configuration menu and select item
Settings
.
This menu settings are similar to the settings described for the application for PC, page 15.
WIRELESS CONNECTION OF SEVERAL VENTILATORS
The unit operates in two modes:
Master.
The unit acts as a leading unit in the network. All the Slave unit and mobile devices are connected to the Master unit via Wi-Fi. The Master unit
is operated by means of a mobile device, the remote control or the touch buttons on the unit casing. The control signal is automatically transferred to
the connected Slave units. In this mode the unit responds to a signal from sensors, as a humidity sensor, an external digital sensor, an external analogue
sensor 0-10 V and changes its operation mode respectively.
Slave.
The unit acts as a driven unit in the network. The Slave unit responds to a signal from the Master unit only. Any other signals from other controls
are ignored. In this mode the ventilators ignore any other signals from the sensors. In case of communication loss with the Master unit above 10 seconds
the unit is turned off.
There are two wireless connection options:
1. Connection of up to 4 Slave units or mobile devices to the Master unit
with its own wireless access point.
In case of connection of four Slave units to the Master unit with its own
wireless access point a mobile device may not be connected.
2. The Master units, the Slave units and the mobile devices are connected
to a wireless access point of the Wi-Fi router.
In this case the Master unit is able to operate 32 Slave units.
Please note that the Wi-Fi routers may have individual limitations for the
maximum number of connected devices.
Master with its
wireless
access point
Slave №1 Slave №2 Slave №3
Mobile
device
Router with its
wireless access
point
Master Slave №1
... ...
Slave №32 Mobile device Mobile device