Nibe BA-SVM 10-200 Series, Инструкция по установке и эксплуатации

Страница: 64 / 88

64 NIBE BA-SVM 10-200
Menu 7.2 - Logging
Select “select a different file” if you do not want to
use the suggested software. When you scroll through
the files, information about the selected software is
shown in a fact box just as before. Once you have
selected a file with the OK button, you will return to
the previous page (menu 7.1) where you can choose
to start the update.
Here you can manage (save or reset) all the user set-
tings (user and service menus) in the controller from
the USB memory stick. With “save settings” you
save the menu settings to the USB memory stick in
order to restore them later or to copy the settings to
another controller.
With “reset settings” you delete all menu settings
from the USB memory stick.
Here you can choose how current measurement val-
ues from the controller should be saved onto a log file
on the USB memory stick.
1. Set the desired logging frequency.
2. Select “on”.
3. The present values from the controller are saved
in a file in the USB memory stick at the set interval
until “on” is unticked.
CAUTION
When you save the menu settings to the USB memory
you replace any previously saved settings on the USB
memory.
CAUTION
Deletion of the menu settings from the USB memory
cannot be undone.
CAUTION
Before removing the USB memory stick, remember
to untick “On”.
Select a different file Menu 7.3 - Manage settings
Setting range: 1 s – 60 min
Factory setting range: 5 s
Section 10 | Service operations
update firmware 7.1
logging
7
.
2
activated
interval sec
5
floor drying logging activated
manage settings 7.3
save settings
recover settings