Nibe BA-SVM 10-200 Series Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 88

background image

56

NIBE BA-SVM 10-200

Menu 5.1.4 - Alarm actions

Menu 5.1.5 - Fan speed, exhaust.

If “add. heat” is selected and activated in menu 4.2

and the current supply temperature exceeds that cal-

culated using the set point value, the additional heat

will be forced to stop.

Indicate here if you would like the control module to

inform you of the presence of an alarm on the display.

One option is that the heat pump stops producing hot

water and/or reduces the room temperature.

Set the speed from the five different available speeds

for the fan here.

Normal and speed 1-4

Setting range: 0 – 100 %

Factory setting normal:75%

Factory setting speed 1: 0%

Factory setting speed 2: 30%

Factory setting speed 3: 80%

Factory setting speed 4: 100%

Max. diff. add. heat

NOTE

If no alarm action is selected, it can result in higher

energy consumption in the event of an alarm.

NOTE

An incorrectly set ventilation flow can damage the

building and may also increase energy consumption

due to the electric heater operation.

CAUTION

Menu 5.1.5 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install
accessory ERS and activate it in the Accessories menu
5.2.4.

If the current supply temperature exceeds the sup-

ply calculated using the set point value, the degree

minute value is set to 0. The compressor in the heat

pump stops when there is only a heating demand.

For detailed information on accessory settings, see

the instructions for the given accessory.

Max. diff. compressor

CAUTION

The factory settings in menu 5.1.12 are the required set-
tings. Only authorised installers and service technicians
are able to edit these settings!

Menu 5.1.6 - Fan speed, supply.

Menu 5.1.12 - Add. heat

Set the speed from the five different available speeds

for the fan here.

The settings in this menu pertain to how the addition-

al heat is controlled.

Max. step

Setting range (binary stepping deactivated): 0 – 3

Setting range (binary stepping activated): 0 – 7

Factory setting max. step: 3

Binary stepping

Setting range: activated / deactivated

Factory settings:

deactivated

Factory setting: add.type: step controlled

Factory setting: positioning: before QN10 (REQUIRED)

NOTE

An incorrect set point value may damage the building

in the long term and possibly increase energy con-

sumption.

Normal and speed 1-4

Setting range: 0 – 100 %

Factory setting normal: 75%

Factory setting speed 1: 0%

Factory setting speed 2: 30%

Factory setting speed 3: 80%

Factory setting speed 4: 100%

CAUTION

Menu 5.1.6 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install
accessory ERS and activate it in the Accessories menu
5.2.4.

Section 9 |

Control

«
...
54
55
56
57
58
...
»

Содержание BA-SVM 10-200 Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для BA-SVM 10-200 Series

AG TN1DKH Series

Бренд: Samsung Страницы: 22

MULTI-TEC W18AAPA

Бренд: Bard Страницы: 51

Бренд: Daewoo Страницы: 14

Бренд: DAEWOO ELECTRONICS Страницы: 18

Бренд: Samsung Страницы: 10

Бренд: Samsung Страницы: 74

Бренд: Haier Страницы: 4

Бренд: Haier Страницы: 8

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 127

Бренд: Hunter Страницы: 35

Бренд: koppel Страницы: 19

Бренд: Montgomery Ward Страницы: 9

Бренд: Midea Страницы: 9

Бренд: Snap-On Страницы: 52

OTEC IEWB Series

Бренд: Omega Страницы: 18

Бренд: Omega Altise Страницы: 24

Zibro SC34 Series

Бренд: Qlima Страницы: 176

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды