Nibe AMB 30, Руководство по установке

Страница: 38 / 52

NOTE
Work behind covers secured by screws may
only be carried out by, or under the supervision
of, a qualified installation engineer.
NOTE
As AMB 30 can be connected to a large num-
ber of external units, these should also be
checked.
NOTE
In the event of action to rectify malfunctions
that require work within screwed hatches the
incoming electricity must isolated at the safety
switch.
NOTE
The product's serial number should always be
stated with all correspondence with NIBE.
_ _ _ _ _ _ _ _ _ _ _ _ _ _
Alarm management
Check the display on the control unit to read off the
status and any alarms.
MR
OK
MR
OK
Information
Temperatures
Alarm
OK
Ground
5 °C/3 °C
Alarm
In event of an alarm similar text to that shown above is displayed and the background lighting flashes.
Here the buttons [-] and [+] are used to scroll through
the options. Return to previous image by scrolling to
the top and pressing
[-] .
Manual resetting of the alarm.
To reset the alarm press the [-] button for 3 seconds
until "OFF" is displayed and then press [+] for 3 seconds
to return to normal mode.
OK
Alarm
Information
BT211
Sensorerr.#
Temperatures
Alarm
AMB 30 Chapter 10 | Disturbances in comfort 36
10 Disturbances in comfort