Hunan Next Generation Instrumental T&C Tech. Co., Ltd.
NGI
l
NGI
N36100 Series
Wide Range High Voltage Programmable DC Power Supply
34
Note 1: If the indicator light at LAN port on N36100 does not flash after the
Ethernet cable was plugged, please check whether the LAN port on computer is
working properly and make sure the computer is switched on correctly.
Note 2: After completing the above operations, the indicator light at LAN port on
N36100 will stop after a short flash. At this time, the hardware network connection
has been established.
8 Remote Operation
N36100 is equipped with four communication interfaces: LAN, RS232, RS485 and
CAN.
N36100 adopts UDP network communication mode. The default port number is 7000.
It adopts standard MODBUS communication protocol. Users can set the IP address.
8.1 LAN Port
The default connection method of N36100 to the computer is via LAN port. Ethernet
cable is supplied as standard accessory.
Steps for Ethernet connection via LAN port:
1. Check if N36100 is switched on properly.
2. Make sure the PC is switched on and its LAN port is working properly.
3. Connect one end of Ethernet cable to PC LAN port.
4. Connect another end of Ethernet cable to N36100 LAN port.
5. Check if the indicator light at LAN port on N36100 is flashing.
Figure 32 LAN Connection Diagram
