Hunan Next Generation Instrumental T&C Tech. Co., Ltd.
NGI
l
NGI
N36100 Series
Wide Range High Voltage Programmable DC Power Supply
30
7.9 CV/CC Priority Function
Generally speaking, which mode the power supply works in depends on the output
voltage setting, output current limit setting and load impedance.
In the case of high resistance or open circuit, the current flowing through the power
supply is very low or no current flows through, the power supply works in CV
(constant voltage) mode.
In the case of low resistance or short circuit, high current flows through the power
supply, and the power supply works in CC (constant current) mode.
N36100 series power supply allows users to set CV priority or CC priority.
The power supply is a feedback control system that can realize the adjustment of
specific parameters. Under CV mode, the feedback control loop can adjust voltage.
Under CC mode, the feedback control loop can adjust current.
The power supply generally operates in CV mode by default. The supply will adjust
the voltage to remain constant until the load consumes enough current to reach the
set current value.
Once the supplied current reaches the set current, the power supply will switch from
CV mode to CC mode. Under CC mode, the supply will adjust the current to remain
constant, and the voltage will begin to drop. The supply will continue to operate
under CC mode until the voltage across the load reaches the set value. In this case,
the power supply will switch from CC mode to CV mode. Under CV mode, the power
supply will start to regulate voltage again as described above.
Note: To exit from
System
, please press
Menu
button or the function button
required.
