settings, and restore the switch to its factory default
configuration.
How to use the RESET button:
To restore the default settings, press and hold the
“Reset” button when the switch is on; the indicator will
change from light/blinking/off, then release the “Reset”
button. When the “SYS” indicators relight, it means the
switch has completed the restore.
Pressing the “Reset” button will cause the loss of all
configured values and a new configuration will be requi-
red. Please DO NOT use the “Reset” button if you do not
want to delete all the current settings.
Network ports:
The switch is made up of 16/24
10/100/1000M autonegotiation RJ-45 ports (Ports 1
~ 16/24), which support Auto MDI/MDIX function.
Giga SFP fiber port (shared with the Giga RJ45 port),
supports SFP fiber hot-plugging Giga RJ45 Ethernet port
and Giga SFP fiber port auto-switch.
SFP port is a fiber module interface; you have to insert
the so-called SFP
（
Mini GBIC
）
to make the fiber connection
available.
SFP module fiber connection takes priority over the RJ45
Ethernet network connection. The switch will cut off the
RJ45 Ethernet switch connection and will automatically
change from an RJ45 to an SFP fiber interface, when the
SFP fiber connection is found.
Note:
The indicator of the SFP goes “on” after about 40
seconds due to the switch initializing process and to the
fiber connection checking.
9
•
•
•
•
