3.12 System
3.12.1 SNMP
All management information and counters are stored in
the Management Information Base (MIB) of the switch.
Usually, the switch adopts the standard MIB-II module,
able to be read by any SNMP-based NMS software. MIB
data may be of either read-only or read-write mode.
You can change the default SNMP community names of
the switch and set access right for such community
names.
Trap is used for the notification of certain events on the
switch. Such events may be serious (for example, switch
reboot) or ordinary (for example, the status change of a
switch port). The switch can generate a trap and send it
to the NMS.
SNMP Configuration:
SNMP enabled:
Enables or disables the SNMP manage-
ment function.
SNMP Trap destination:
Sets the destination IP address
of the Trap message of the switch.
40
•
•
