with the corresponding device. Flow control is used to set
the data flow and prevents the buffer overflow of the
receiving device. The port management setting will affect
port bandwidth control, port mirroring and trunking
functions.
3.3.1 Port
Port configuration:
Only the ports belonging to the same
VLAN group can communicate together; a port can
belong to more than one VLAN group and communicate
with multiple VLAN groups at the same time.
The configuration of the basic functions of the switch
include: port enable/disable, operating mode and flow
control.
The following section describes the configuration details:
Port:
Allows the selection of the corresponding port
number 16/24 and the setting of network speeds of
10/100/1000 Mbps, either in half or full duplex modes.
Admin:
Enable or disable the traffic on the corresponding
port. (Caution: Do not disable the ports unless it is
17
•
•
