3.2 System Status
The following window displays basic system information.
Hardware Version: Hardware version of the switch.
Firmware Version: Software version of the switch.
DHCP Client: Status of the DHCP client, “Disable” by
default.
IP Address: “192.168.0.1” (default).
Subnet Mask: “255.255.255.0” (default).
Gateway: “0.0.0.0” (default).
MAC Address: MAC address of the switch.
ARL Aging Time: Aging time of the MAC address set,
(Default is 300).
3.3 Port Setting
In the Port Setting window it is possible to set autonego-
tiation, speed, duplex, flow control modes for each port.
Every port can be set as follows: 10M half-duplex, 10M
full-duplex, 100M half-duplex, 100M full-duplex, 1G
full-duplex, auto-negotiation. Some devices are not able to
negotiate the speed and operating mode (e.g. some
media converters). In that case, configure the speed
according to the device.
By default, port speed is auto-negotiated, so that it is
possible to choose the best work mode after negotiating
16
•
•
•
•
•
•
•
•
