Nexus NX Sea Data, Инструкция по установке и эксплуатации

Страница: 22 / 30

SEA DATA English
21
8.1.4 Damping of Speed, C13 (SEA)
Damping of indicated boat speed through the water. Controls the
response time of speed changes.
To change damping, press
SET .
To select damping level, press PLUS and select from:
( LOW ) 1 sec, ( MED ) 5 sec and ( MAX ) 22 sec.
To store the value, press SET .
Default value is ( LOW ), for use in calm sea. But if the sea is
rough, you may want to ”stabilise” the readout on the display, then
select (
MID ) or ( MAX ). Damping is set separately for each
instrument.
8.1.5 Unit for Depth readings, C14 (Unit m)
Unit for depth. Metre (m), feet (Ft) or fathoms (FA).
8.1.6 Adjust Depth readings, C15 ( - 00.0 ADJ)
Calibration of the depth transducer position.
This option is used to select whether the displayed water depth is
measured from the water level or the keel.
To measure from the keel, use the minus ( - ) sign.
Example: ( - 01.2 ADJ). The distance from the transducer to the
keel is 1.2 m
To measure from the water surface, use the underlining character
( _ ) sign.
Example: ( _ 00.4 ADJ). The distance from the transducer to the
water surface is 0.4 m.
The selected value will be subtracted or added from the measured
depth.
8.1.7 Unit for Temp readings, C16 (Unit°C)
Unit for temperature. Celsius (C) or Fahrenheit (F).
8.1.8 Adjustment of Temp reading,C17 (0°C TMP)
Value to adjust the temperature.
To add, use underlining character ( _ ) ahead of the digit ( _1
TMP).
To subtract, use minus character ( - ) ahead of the digit (-1 TMP).