Nexus NX Sea Data, Инструкция по установке и эксплуатации

Страница: 15 / 30

English SEA DATA
14
5 SPEED functions
The Sea Data instruments SPEED page is indicated by the LCD
marker at top of the display. You can easily combine this main
function with any sub function (See 9).
SPEED main-function
Boat speed through the water
Unit available in knots (KT), km/h (Kh) or miles/h (Mh)
SPEED sub-functions
Both water speed and water temperature is measured from the
log transducer.
TRIP LOG (TRP)
Distance from 0 to 199,99 NM
To reset TRIP LOG press
CLEAR .
TOTAL LOG (LOG)
Distance from 0 to 19999 NM.
The total log can not be reset.
START TIMER (STA)
Count down timer can be set between 59 and 1 minute.
To start the timer from minus 10 minutes (-10’STA) press
SET .
The figure 1 in 10 is flashing. Press SET to start.
Change start timer.
Set to 5 minutes (-5’STA), press
PAGE , MINUS and PLUS as
required to set 5 minutes (or any value), Press SET to Start .
During the last 10 seconds the alarm will sound once every
second.
TIMER
Elapsed time in hour, minute and seconds from power on, or
from end of start timer count down. Press
CLEAR to reset.
AVERAGE SPEED (AVS)
The average speed from power on, or from reset of timer
To reset press
CLEAR