Nexus 21 L-45ens, Руководство по установке

Страница: 22 / 32

22
Installing the Tapered Pins in the Floating Lid
What Are the Tapered Pins, and Why Use Them?
The two 1½” x ¼” Steel Threaded Tapered Pins are used IN PLACE OF SCREWS to hold your cabinet top (lid) in
place on the Lift System Top Plate Bracket (Part #8). The Tapered Pins will keep your lid firmly in place, but will
also allow it to separate from the lift system if anything (like a finger) gets in the way when the TV lowers. See
Safety Notice above. Please do NOT use screws with your cabinet lid.
Before You Install the
Tapered Pins , Here is a Reminder of the Two Types of Floating Lids (Floating Tops):
Floating Lid (Floating Top) – The whole top of the cabinet sits on top of the Lift System and raises/lowers with
the TV.
Cut-Out Floating Lid (Top) – This option assumes that you have “cut out” part of your cabinet top, customizing
it to the size of your TV. That cut-out lid then sits on the Top Plate Bracket of the Lift System, held in place by
the Taper Pins , and raises/lowers with the TV. You must set up a “catch” for the Cut-Out Lid so that when the
TV lowers, the Lid stops level with the rest of your cabinet top (like a manhole cover), and the Lift System
continues down a little further into the cabinet (no more than ¼” to ½”). In this way, when the Lift System is
fully retracted, the Cut-Out Lid will always be level, and the
Top Plate Bracket of the Lift System will always be
positioned just below the Lid. Since the Lid and the Top Plate Bracket are slightly separated from one another,
but still very close, the Taper Pins (which are 1½” long) will still be hanging down through the holes in the Top
Plate so when the Lift System moves, everything is properly aligned and the Lid rides smoothly up and down.