Nexus 21 L-45ens, Руководство по установке

Страница: 21 / 32

21
The Top Plate Bracket (Part #8) is a 5-part plate (one Main Plate, two Extensions and two Fine-tuning Plates)
that allows you to adjust the depth and position of the plate relative to the Threaded Tapered Pins (Steps 22-
27). The Top Plate Bracket comes pre-assembled in a semi-retracted configuration. If you need to expand the
depth of the plate to accommodate a deeper cabinet lid, remove the flat head machine screws from the
Extensions, move them to the depth you need, and re-insert the machine screws. Fully retracted, the
Top
Plate Bracket has a depth of 6 ½”, and can be adjusted to 7 ½” and 8 ½” with the Extensions on either end of
the plate. (See Photo Below)
Step 22: Attach the
Top Plate Bracket (Part #8) to both Top Support Brackets. Using (4) 6mm x 16mm FHMS
Screws attach the Top Plate Bracket to both Top Support Brackets using the four outermost countersunk holes.
NOTE: Do not bolt/screw the Lid to the Top Plate.
Use the provided Tapered Pins to attach the Lid to the lift
system. The Tapered Pins allow the lid to lift away when there is an obstruction. See the following page for
further details.