Nexus 21 L-45ens, Руководство по установке

Страница: 16 / 32

16
Step 12: Attach the Upper Rear Support Bracket to
the rear panel of your cabinet. Fully extend the
Lift Column . Using (2 ) #10 x ¾” THWS Screws fasten
the Upper Rear Support Bracket to the rear panel of
the cabinet.
Note: Make sure to center the Lift Column from left
to right.
Step 13: Attach the
Lower Rear Support Bracket to
the rear panel of your cabinet. Using (4) #10 x ¾”
THWS Screws fasten the Lower Rear Support Bracket
to the rear panel of the cabinet.
Step 14: Attach both
Base Plate Brackets to the base of the cabinet. Using (12 ) #10 x ¾” THWS Screws (6
screws per side) fasten both Base Plate Brackets to the base of the cabinet.
NOTE: Step 15a - 15c assumes all joints are Butt Joints when determining the dimensions for each Panel.