NextBase 412GW Professional, Инструкция по эксплуатации

Страница: 28 / 54

Setup Menu
The Setup Menu is accessed by pressing the MENU button twice.
The default settings have been carefully selected to allow you to use the iN-CAR CAM without the
need to change any settings. However, should you wish to change a setting then please see below.
Use the up and down buttons to highlight the function that you'd like to change and press the OK
button to enter the settings sub-menu.
Once in the submenu, use the up and down buttons to highlight the required setting and then press
OK to confirm your selection and return to the Photo Menu.
Press the MENU button twice to return to video mode.
1. WiFi
The Wi-Fi function allows you to use your smartphone or tablet device to view recordings
directly from the dash cam.
See pages 33 to 48 for full guide on using the WiFi function.
2. Format SD Card
Format the inserted memory card, this will delete all content.
Note:
- For stable performance, it is recommended that you format the memory card every
2-3 weeks.
Of course, you should only do this AFTER you've downloaded any files from the card that
you may want to keep.
3. Time & Date
Adjust the time / date as required using the OK button to toggle through the fields and use
the up & down buttons to set variables. Press MENU to exit and return to the Setup Menu.
4. Time Zones / DST
The time and date is automatically set from the satellite signal, but can be adjusted
dependent upon your Time Zone (country) or whether Daylight Savings Time (DST) is
operational.
SETUP MENU
28
Setup Menu
WiFi
Format SD Card
Back
MENU
Enter OK
Timezones / DST
Time & Date