NextBase 402G, Инструкция по эксплуатации

Страница: 11 / 40

VIDEO MODE
The key below explains the various information displayed on the screen when your iN-CAR CAM is in
Video mode, some icons will only be displayed once the relevant function has been selected within the
Video menu, as described further down this page.
1. Motion Detection Icon: This icon appears if motion detection is switched on.
2. WDR Icon: Remains on screen as iN-CAR CAM utilises WDR technology.
3. Recording Indicator: Flashes red when a recording is in progress.
4. Video Mode Icon: Indicates the iN-CAR CAM is in Video mode.
5. Resolution: Displays the current resolution as selected from within the Video menu.
6. Loop Recording Icon: Displays ‘recording loop’ time as selected within the Video menu.
7. Exposure Icon: Displays current exposure setting as selected from within the Video menu.
8. Microphone Icon: Displayed on screen when Audio Recording is active.
9. Battery Indicator: Displays battery level, keep the car adaptor plugged in during use.
10. GPS Icon: The icon will flash while the iN-CAR CAM locates satellites. Once a stable signal is
received, the icon will stop flashing and remain on screen.
11. White Balance Icon: Displays White Balance setting.
12. Compass / Speed Display Icon: Shown on screen when function has been turned on.
13. Driver Fatigue Icon: Shown on screen when function has been turned on.
14. Time: Displays current time as set within the Setup menu.
15. Date: Displays current date as set within the Setup menu.
16. Recording Time: Displays the length of current recording.
17. Memory Card Icon: Icon will be marked with a red cross when there is no memory card inserted.
18. Protected File Icon: Displayed when a video file has been protected by activation of the internal
G Sensor or by pressing the SOS file protect button.
The Video menu is accessed by using the MENU button located on the rear of the iN-CAR CAM,
use the UP and DOWN buttons to navigate through the Menu and press the OK button to enter the
options screen. Select the required setting and press OK to confirm, press MENU once more to exit
the Video Menu.
The default settings within the iN-CAR CAM have been set to allow you to use the iN-CAR CAM
without the need to change any settings, however it is recommended that you explore these settings
to familiarise yourself with the product and it’s capabilities.
Note:
Within the SETUP menu which is accessed by pressing the MENU button twice, there is a
‘Default Setting’ option to allow you to reset the iN-CAR CAM to the factory defaults, if required.
WDR 1080P
AWB
3
+ 1
00:00:00
17
6 3
15
2 4 5 7 8 9
16
10
11
13
1
14
18
12
11