background image

1-year hoMe use WarranTy 

This product is warranted to the original purchaser to be free of defects in material and workmanship 
for one (1) year from the date of purchase. This warranty does not extend to commercial or institu-
tional use or installation. Warranty service should be arranged through the point of purchase. The 
purchaser is responsible for transporting the unit to and from the point of purchase. Incidental repairs 
that would involve a minimum of time and effort on behalf of the purchaser will not be considered 
warranty work and no compensation will be deemed forthcoming. Any failure of the unit that is not 
traceable to a defect in material or workmanship is not covered by this warranty. These non-warrant-
able items include, but are not limited to:

•  Change in colour or finish due to chemical usage
•  The use of abrasive cleansers
•   Improper maintenance resulting from failure to reasonably clean, care for or maintain a product in ac-

cordance to Quality Craft’s cleaning instructions

•  Unit not properly installed in accordance with manufacturer’s instructions
•  Damage caused during shipping, handling or installation
•  Operating, maintenance, safety guidelines not being followed
•  Any alterations to the unit
•  Damage to the unit as a result of accidental impact, fire, flood, freezing, normal wear
•   Light bulbs are not covered by this warranty
•  Scratches, chips, cracks or holes caused by shipping, storage or installation

A thorough inspection must be made at time of pick up or delivery. If the unit is damaged,  
a claim must be made with the carrier. Report any damage promptly and prior to installation. Quality 
Craft Ltd. will not be held liable for any freight damage or damage caused by leaks due to freight 
damage. Inspection prior to installation is the responsibility of the installer, contractor or user. Quality 
Craft Ltd. will not be liable for failures or damage that could have been discovered or avoided by 
proper inspection and testing. Quality Craft Ltd. will not be held liable for damages resulting from 
the improper fit or installation of products not supplied by this company. Quality Craft Ltd. will not be 
held liable for loss of use of unit, inconvenience, costs incurred for labour, materials, removal and 
installation of replacement units or any other incidental  or consequential damages. Costs relating to 
obtaining access for repair or replacement are the responsibility of the user. Under no circumstance 
shall Quality Craft Ltd. or any of its representatives be held liable for injury to any persons or damage 
to any property.  Quality Craft Ltd.’s obligations shall be limited to the repair or replacement of a unit 
(at our option) that may prove, by our sole examination, to be defective under normal use and service 
during the warranty period. The Company may issue credit in the amount of the invoice value of the 
defective product (or a percentage of it according to use) in lieu of repair or replacement.

 

All replace-

ments FOB Quality Craft Ltd. nearest service depot.
Quality Craft Ltd. warranty is non-transferable and shall be voided if the unit is removed from its initial 
installation or if it is not installed following the manufacturer’s specifications. This warranty shall not 
apply to any product that has been subject to accident, alteration, misuse, abnormal chemical condi-
tions. This warranty is made in lieu of all other warranties expressed or implied. No other warranty, 
expressed or implied, is assumed or will be assumed.

Imported by 

Quality Craft Kitchen & Bath Ltd.

 

2436 Industriel Blvd., Laval, Quebec, Canada, H7S 2G7
TOLL FREE TEL: 1-800-459-4409

www.qualitycraft.com 

Made in China

Содержание 654OSA005STS






























Отзывы: