24
- This must be cleaned once a month using non-abrasive detergents,
either by hand or in the dish-washer, which must be set at a low
temperature on a short cycle.
- When washed in a dish washer, the grease filter may discolour
slightly, but this does not affect its filtering ability.
- Dry filters and re-install before using hood.
WARNING:
Failure to carry out
the basic standards of cleaning of
the range hood and replacement
of the filters may cause fire risks.
We therefore recommend that you
follow these instructions.
Replacing Filters:
- Should filters wear out due to age or prolonged use, replace with an
aluminum grease filter (with stainless steel clips).
- Note: Also replace a damaged filter that has punctures or a bent or
broken frame.
Replacing the light bulb:
Should the light set burn out due to age or prolonged use, replace with
new LED light set. For LED light replacement, please contact customer
service at: 1-800-459-4409
If new lights do not operate, make sure the LED light is inserted correctly.
Before replacing LED lights, ensure the unit is switched off. When
changing LED lights always wear work safety gloves. WARNING:
Disconnect the hood from electrical power and be sure the lights have
cooled.
LED
Light Set
Small flat
head screwdriver
Remove light set
Replace new LED
light into light
connector
Replace light set
1. Turn off the range hood.
2. Make sure the lights are cool to touch. Use a small flat head
screwdriver or equivalent tool and carefully pull out the light set from
the hood body.
WARNING
Light bulbs can become extremely hot when turned on.
DO NOT touch bulb until switched off and cooled.
Touching hot bulbs could cause serious burns.
SEVERE INJURY
BURN HAZARD
Rotating blower fan can cause severe injury.
Stay clear of fan when motor is running.
