27
i. range hood operaTion
24 HOUR CLOCK SETTINGS
1. When the range hood is plugged in for the first time, the entire screen
will flash for 2 seconds, then only the clock (00:00) will flash.
2. To set the time, press and hold the SETUP button for more than 2
seconds until the first set of 00’s start to flash.
3. Press the SPEED button to change the hour. Once the hour is correct,
press the SETUP button and the second set of 00’s will flash.
4. Press the SPEED button until the desired minutes appear. This is a
24 hour clock where 00:00 = Hour:Minutes.
5. Press SETUP again to confirm the time settings. If during the setup
process no button is pressed for more than 5 seconds, the clock will
revert to the previous time setting.
FAN OPERATION
1. Press the ON/OFF button to start the blower. The blower will start on
the high speed setting.
2. Pressing the SPEED button will set the fan on high speed. Press again
to turn the fan to medium speed (the icon will change to the medium
speed Icon). Press the Speed button again to set the fan at low speed
(the same icon will stay lit and the blades will rotate slower).
3. Press the ON/OFF button twice to turn off the range hood fan. This
will not turn off the light, If the light is on, press the LIGHT button once.
DELAY SHUT-OFF
1. With the fans running, press the SETUP button once.
2. Set the delay time using the same procedure as setting the clock.
3. Once the correct delay time is set, press the SETUP button to
commence the timer count down.
4. When the timer reaches 00:00, the blower will stop and the system
will beep 1 time.
5. To cancel the delay shut-off during count down, press the Setup
button once.
NOTE: The delay shut-off will only turn off the blower. If the lights are
on, they will remain on after the timer reaches 00:00 and the fan shuts
down. The fan MUST be running to start the delay shut-off feature.
Setup
Fonctions
Speed
Vitesse
Light
Éclairage
On/Off
Marche/Arrêt
