Nexcom PEAK 760 Series, Руководство пользователя

Страница: 52 / 78

PEAK 760 User’s Manual 51 Appendix A
Video Off Method
This determines the manner in which the monitor is blanked. There are three choices:
1. V/H SYNC+Blank: This selection will cause the system to turn off the vertical and horizontal
synchronization port and write blanks to the video buffer.
2. Blank Screen: This option only writes blanks to the video buffer.
3. DPMS Support: Select this option if your monitor supports the Display Power Management signaling
(DPMS) standard of the Video Electronics Standard to select video power management values.
Video Off In Suspend
This determines the manner in which the monitor is blanked. The choices: Yes, No.
Suspend Mode
After the selected period of system inactivity, all devices except the CPU shut off. The choices are 1~2
min, 2~3 min,…. Up to 1 hour.
HDD Power Down
After the selected period of drive inactivity, the hard disk drive powers down while all other devices
remain active.
Power On by Ring
This feature allows you to enable or disable Power On by Ring.
Reload Global Timer Events
Primary/Secondary IDE 0/1
FDD, COM, LPT Port
PCI PIRQ [A-D]#
The events are I/O events whose occurrence can prevent the system from entering a power saving mode
or can awaken the system from such a mode. In effect, the system remains alert for anything, which
occurs to a device, which is configured as Enabled, even when the system is in a power down mode. The
choices are Enabled, and Disabled.
After you have made your selections in the Power Management setup, press the <ESC> key to go back to
the main program screen.