Nexcom PEAK 760 Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 78

background image

PEAK 760 User’s Manual

53

Appendix A

4.12 PC Health Status

When main boards support hardware monitoring, this item lets you monitor the parameters for critical
voltages, critical temperatures, and fan speeds. These are the read only items.
After you have read the PC Health Status, press the <ESC> key to go back to the main program screen.

Figure 4-7: PC Health Status

4.13 Load Fail-Safe Defaults

This option opens a dialog box that lets you install fail-safe defaults for all appropriate items in the whole
setup utility. Press the <Y> key and then <Enter> to install the defaults. Press the <N> key and then
<Enter> to not install the defaults.
Use this option if you have changed your system and it does not operate correctly or does not power up.

4.14 Load Optimized Defaults

This option opens a dialog box that lets you install optimized defaults for all appropriate items in the
whole setup utility. Press the <Y> key and then <Enter> to install the defaults. Press the <N> key and
then <Enter> to not install the defaults. The optimized defaults place demands on the system that may be
greater than the performance level of the components, such as the CPU and the memory. You can cause
fatal errors or instability if you install the optimized defaults when your hardware does not support them.
If you only want to install setup defaults for a specific option, select and display that option, and then
press the <F7> key.

«
...
52
53
54
55
56
...
»

Содержание PEAK 760 Series















































































Отзывы:

Нет отзывов

Похожие инструкции для PEAK 760 Series

Бренд: Xilinx Страницы: 23

Бренд: Xilinx Страницы: 60

Бренд: Xilinx Страницы: 41

Zynq UltraScale+ ZCU104

Бренд: Xilinx Страницы: 92

Zynq UltraScale+ ZCU104

Бренд: Xilinx Страницы: 4

Spartan-3A DSP FPGA Series

Бренд: Xilinx Страницы: 10

Бренд: Xilinx Страницы: 92

Бренд: Yamaha Страницы: 90

Бренд: Intel Страницы: 80

Бренд: QDI Страницы: 22

Бренд: DFI Страницы: 104

Бренд: Advantech Страницы: 118

Spacewalker AK32

Бренд: Shuttle Страницы: 89

Бренд: Biostar Страницы: 51

Бренд: Silicon Laboratories Страницы: 18

Бренд: Gigabyte Страницы: 96

Бренд: IEI Technology Страницы: 194

Voltage Supervisor SOT23

Бренд: Microchip Technology Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды