Nexcom PEAK 760 Series, Руководство пользователя

Страница: 53 / 78

PEAK 760 User’s Manual 52 Appendix A
4.11 PnP/PCI Configurations
This section describes configuring the PCI bus system. Peripheral Component Interface is a system,
which allows I/O devices to operate at speeds nearing the speed the CPU itself, uses when communicating
with its own special components. This section covers some very technical items and it is strongly
recommended that only experienced users should make any changes to the default settings.
Selecting PnP/PCI Configurations on the main program screen displays this menu:
Figure 4-6: BIOS – PnP/PCI Configurations
Reset Configuration Data
Normally, you leave this field Disabled, Select Enabled to reset Extended System Configuration Data
(ESCD) when you exit Setup if you have installed a new add-on Card and the system reconfiguration has
caused such a serious conflict that the operating system cannot boot. The choices are Enabled and
Disabled.
Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug and
Play compatible devices. However, this capability means absolutely nothing unless you are using a Plug
and Play operating system such as going into each of the submenus that follows this field. The choices are
Auto (ESCD), Manual.