manualshive.com logo in svg

Nexcom PEAK 7220VL2G, Руководство пользователя

Поделиться
Скачать
Nexcom PEAK 7220VL2G Скачать руководство пользователя страница 45

Power Supply Type

The choices: AT, ATX.

   

 ACPI Function

The ACPI standard (Advanced Configuration and Power Interface) allows the operat-
ing system  to directly check the functions of energy saving and the PnP (Plug and
Play) functionality. The ACPI functions are normally activated by the BIOS. The
choices are: Enabled and Disabled.

44

   Power Management

This category allows you to select the type (or degree) of power saving and is directly
related to the following modes: HDD Power Down, Doze Mode and Suspend Mode

Min. Saving: Minimum power management
Max Saving: Maximum power management
User Define: Allows you to set each mode individually

    

Video Off Method

This determines the manner in which the monitor is blanked. There are three choices:

1. V/H SYNC+Blank: This selection will cause the system to turn off the vertical and
       horizontal synchronization port and write blanks to the video buffer.
2. Blank Screen: This option only writes blanks to the video buffer.
3. DPMS Support: Select this option if your monitor supports the Display Power
      Management signaling (DPMS) standard of the Video Electronics Standard to
      select video power management  values.

    Video Off In Suspend

This determines the manner in which the monitor is blanked. The choices: Yes, No.

Suspend Type

Select the Suspend Type.
The Choices: PwrON Suspend, Stop Grant.

MODEM Use IRQ

This determines the IRQ in which the MODEM can use.
The Choices: 3, 4, 5, 7, 9, 10, 11, NA.

Содержание PEAK 7220VL2G
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды