Nexcom PEAK 7220VL2G, Руководство пользователя

Страница: 29 / 63

4.1 Entering Setup
When the system is powered on, the BIOS will enter the Power-On Self Test (POST)
routines. These routines perform various diagnostic checks; if an error is encountered,
the error will be reported in one of two different ways:
If the error occurs before the display device is initialized, a series of beeps will be
transmitted.
If the error occurs after the display device is initialized, the screen will display the
error message.
Powering on the computer and immediately pressing < Del > allows you to enter Setup.
Another way to enter Setup is to power on the computer and wait for the following
message during the POST:
TO ENTER SETUP BEFORE BOOT
PRESS <CTRL-ALT-ESC> OR <DEL> KEY
Press the < Del > key or press the < Ctrl >, < Alt >, and < Esc > keys to enter Setup:
4.2 The Main Menu
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (Figure 1) will ap-
pear on the screen. The main menu allows you to select from ten setup functions and
two exit choices. Use arrow keys to select among the items and press
<Enter > to
accept or enter the sub-menu.
Figure 4-1: BIOS Setup Utility Main Menu
28