3
OPERATING INSTRUCTIONS
Remove the lens cap from the objective lens (2).
Activate the device by
pressing the “ON” button
(
2
) - a stable green indic
a
tor will light up.
Locate an object within 20 to 30 meters.
Rotate the eyepiece (4) until you clearly see the frame of the display and
a fine
black grid on it.
To turn on the IR Illuminator (
6
)
press the “IR” button
(
3
).
A red indicator will light up.
Rotate the objective lens (
5
) until you see a sharp image of the object. The use of the IR-illuminator in the
optimal mode prolongs operating time.
When changing the viewing distance, try to see a sharp and high-quality image by rotating the objective lens
(
5
)
.
Do not rotate the eyepiece (4) - the device has already been individually adjusted.
After use switch off the device by pressing the “ON” button (2) - the green indicator will go out.
CARE AND STORAGE
Do not subject the digital NV device to shock or impact. Do not drop.
Turn off the device when not in use and when
carrying
the unit.
The device can be used in daylight as well as nighttime conditions.
After using the device in cold temperatures, please, wait up to 2-3 hours before using the device in the warm
temperatures. This helps prevent condensation on the lenses.
28
2
3
4
1
5
6
CR123A / 3V
+
-
Be careful, observe the polarity shown on the battery cover.
