Newton Security T-DAR T1000, Инструкция по установке и эксплуатации

Страница: 70 / 92

70
e)
Select, via the one of the four STR DIP switches, the message you
wish to record over. This message will repeat until its switch is
restored.
f)
Depress and hold the record switch SW1 and speak the new
message clearly into the unit.
g)
Release the record switch when complete. Your new message
should now be playing repeatedly.
h) If satisfied with the new message, restore the STR DIP switch
selected for reprogramming to its normal off position.
i)
Replace and secure the cover with the (6) 6/32 Phillips head screws.
Please see the figure on the following page for component locations.
(Shown in default Microphone Programmable position)
Figure 34- Annunciator PCB
To change the Voice Announcement via audio input jack:
a) Gain access to the printed circuit board within the Annunciator.
Remove the (6) 6/32 Phillips head screws that attach the top cover.
Maintenance
Periodically, the unit should be inspected for any signs of damage or build up of
debris on the camera head as well as the intake and exhaust ports of the controller.
Remove any debris with a damp cloth.