Newton Security T-DAR T1000, Инструкция по установке и эксплуатации

Страница: 62 / 92

62
Outputs
There are five relays on a CB-100 and six relays on a CB-200 for connecting signals
through the T-DAR. The first two relays are for Portal 1,
Relay Portal 1-1 and Relay
Portal 1-2 . Portal 2 has the next two relays, Relay Portal 2-1 and Relay Portal 2-2 .
There is one spare relay for each portal, Portal 1 Relay Spare and Portal 2 Relay
Spare . Activating the relay is caused by enabling the selected relay number to
make contact when an alarm event is present.
For example selecting Suspicious entries set outputs check box 1, will close
Relay Portal 1-1 when a suspicious entry alarm condition exists. Likewise; when
Warnings set outputs check box 5 is clicked, Portal 1 Relay Spare will close for
that event.
Any combination of relays and triggering events may be selected. There is no
specification as to how the relays are to be implemented. Regardless of whatever
the control situation dictates there are three ways to close any of the relays.
Camera Geometry
Camera Geometry defines the physical placement of the stereo tracking head in
relation to the door under surveillance. The installation details for height above floor,
camera center from door and door actual width must be entered in these text boxes.
Please refer to figure 8 for door installation specifics
Change Installer Password
Figure 28 - Installer Password
Change Administrator Password
Same process as changing Installer Password