Newton Security T-DAR T1000, Инструкция по установке и эксплуатации

Страница: 48 / 92

48
Connection Menu
Figure 21 – Connection
Connect
Establishes communication between the UI application and the T-DAR hardware. A
connection must be established before proceeding to the run menu or before
performing subsequent UI operations. If the T-DAR IP has been previously
configured, selecting
Connect from the menu will enable the User Interface. Once
enabled, changes may be made to the connected unit.
Disconnect
From a connected or enabled User Interface, Disconnect may be used to close the
connection with the T-DAR. The ability to make changes to the unit ceases, but the
User Interface remains open on the Host computer. This is a convenient method to
troubleshoot connectivity problem.
Configure Connection
This selection allows for adjustment as to how the T-DAR connects to the host
computer. Connections may be made via addressable IP or serial connection. The
option for
Always Connect on Start Up is also provided.
For more details please see the Configure Connection section on Page 47