Newton Security T-DAR T1000, Инструкция по установке и эксплуатации

Страница: 39 / 92

39
Door Control Unit Application
1. Connect the TDAR system. Refer to page 38
2. Insert the T-DAR Software CD-ROM into the host PC.
3. Press Start on the Task bar and select Run.
4. From the Run dialog box, type d
1
:\update or
5. If the system is connected via a serial cable instead of the normal Ethernet,
browse to the CD-ROM drive and execute update.exe.
6. If the T-DAR controller is connected via Ethernet, browse to the CD-ROM drive
and execute update.exe ###.###.###.###, substituting the #’s with the IP
address of the vision system.
7. Follow the on-screen instructions.
After the software is loaded, the UI may be launched from the start menu on the host
computer.
Start -> Programs -> Newton Security Inc -> T-DAR
Once the system hardware is configured, the UI application is no longer needed and
the T-DAR will run unaided.
IMPORTANT NOTE: There can only be one copy of the T-DAR UI installed on a
computer at a time. As an example, T-DAR Mantrap software must be removed
before T-DAR Tailgate Detection software is installed. Failure to do so will result in
unexpected behavior.
1
Substitute d with your host computer’s CD-ROM drive letter