Setting up the antenna
Version 2.3 - January 2009
Astra2Connect Point&Play
®
Setup Manual - page 13
Step 3 - Mounting the antenna
1
Fix the grounding screw with a masthead grounding nut to the masthead as shown.
2
Insert the 2 brackets in the masthead as shown.
3
Use the 2 pole clamps and nuts to attach the masthead to the pole.
-
If the pole is low enough, you can first assemble the masthead, brackets and clamps and
slide the assembly over the antenna pole.
-
If the pole is too high or does not have an open ending, you will have to fix the masthead
around the pole.
-
Do not attach the clamp too tightly as you will need to adjust it later on, but make sure the
clamp is attached tightly enough to prevent it from sliding down the pole.
