Setting up the antenna
Astra2Connect Point&Play
®
Setup Manual - page 32
Version 2.3 - January 2009
Using the Point&Play
®
Tool
The Point&Play
®
Tool will help you point the antenna correctly. During the pointing procedure, the
Point&Play
®
Tool can produce various sounds, each having a specific meaning described below.
You will thus need to put on the headphone whenever needed during the pointing procedure.
Ensure that the volume of the Point&Play
®
tool is not set too loudly, otherwise damage
to your hearing may occur.
Possible tones are:
Correct tone
High uninterrupted tone (correct tone)
The antenna points to the correct satellite and is receiving the strongest signal: you have
the optimal pointing position.
Higher interrupted tone
The antenna points to the correct satellite but does not receive the strongest signal so
far. As soon as you hear this tone, you are sure that the antenna points to the correct
satellite.
Low uninterrupted tone
The antenna points to a wrong satellite and receives the strongest signal so far.
Very low uninterrupted tone
The antenna is not pointing to a satellite and has not been pointing to the correct
satellite yet.
