Introduction
Version 2.3 - January 2009
Astra2Connect Point&Play
®
Setup Manual - page 3
1 Introduction
About this guide
This guide provides a step-by-step procedure to install the Astra2Connect terminal (consisting of
the antenna and the IPmodem).
Before installing
Before starting to install the antenna, it is important to read the following sections:
- Safety precautions (page 4)
- Material provided in the box (page 6)
- Material you need to provide yourself (page 8)
Follow the entire procedure
When installing the antenna, it is important that you follow the entire procedure step-by step.
When pointing the antenna, you may need to repeat the steps from the section
Rough pointing:
horizontal (azimuth) (page 36)
onwards to obtain optimal signal reception and transmission.
Related documentation
When installing the satellite dish, you will need to refer to the following documents:
- The Antenna Pointing Information document, which contains the geographical pointing data
(booklet included in the box)
- Terminal User Manual (available on the CD included in the box)
Copyright
© Copyright Newtec Cy NV - 2009.
