ESP301
Controller GUI Manual
2.0
Installation
2.1
Install ESP301 Graphical User Interface
Following are steps to install the ESP301 GUI:
•
For 32 bit, Select and launch “ESP301 Utility Installer Win32.exe”. For 64 bit,
Select and launch “ESP301 Utility Installer Win64.exe”.
•
A window opens up showing Install welcome page.
•
Click on “Next”.
•
A window opens up allowing destination folder selection. By default it is showing
C:\.
•
Click on “Next”.
•
Ready to install window opens up. Click “Install”.
•
Then installation starts, wait for completion. Click on “Finish” to finalize the
installation.
32 bit installer will install “Newport.ESP301.CommandInterface.dll” in GAC_32 folder
and 64 bit installer will install the dll in GAC_64 folder.
NOTE
LabVIEW users can add a reference of the command interface dll from GAC
during VI creation.
2.2
Launch GUI
From Windows “START” menu, select “All Programs\Newport\Motion
Control\ESP301\ESP301 Utility”.
EDH0282En1030 — 01/17
2
